Wood Industry One-Stop Service Solution.Offering the Widest Selection of Hydraulic Components and Solutions!
Language
Wood Industry One-Stop Service Solution.Offering the Widest Selection of Hydraulic Components and Solutions!
Take you to understand the common operating procedures of the hot press
Hot pressing technology is very simple for people who know a lot about building formwork, but for some other industry people may be relatively unfamiliar, about the operating procedures of the hot pressing machine for building formwork below we will understand: adjust the hot pressing parameters strictly according to the process requirements in the work, and the adjustment should be authorized by the technician or the technician personally adjusted. Slab in the press to the center of the plate as the axis, it is strictly prohibited to deflect the pressure.
According to the performance of the press, the pressure must be replenished within a certain time range, and the pressure must be relieved within a certain time according to the temperature, and the time must not be shortened or extended. It is strictly forbidden to adjust the slab during the heating process of the plate, and it is forbidden to exclude one person when an accident occurs. The handover work must be excluded under supervision after the brake is pulled, and the handover personnel should check whether the equipment is in good condition. After the work is finished, the hot press and production area must be cleaned. The replacement should carefully inspect the hot press, loading and unloading machine, pump station and other equipment, check the operation record in detail, and understand the process parameters. Check whether the oil level and pressure of the tank meet the process requirements.
Check the heat transfer oil inlet system, whether there is oil leakage phenomenon, first open the valve, and then preheat the plate press, check whether the pressure gauge and temperature meter are normal. All confirmed before the boot. These are some basic matters that need to be paid attention to when the hot press is operated, and I hope the above information can be helpful to the majority of hot press users.
